Project Description
Multiband Power Splitter 3 Way (Reactive model, 350-3800MHz, 300W, IP65, -160dBc)
- Wide Frequency range 350-3800MHz
- Low Insertion loss ≤0.5dB
- Low Intermodulation -160dBc@2*43dBm
- Widely in 3G/4G/LTE/5G DAS Coverage
- Indoor/Outdoor application IP65
Share Now!
Our Highlight Optimization
Our Power Splitter 3 Way have wide and multiband covering, 350-3800MHz widely used for 5G wireless system.
We test the Amplitude Balance(dB) for each antenna power splitter to make sure the stablility of the RF signal. For the 3rd PIM testing, we test all the frequency range include 700MHz/800MHz/900MHz/2100MHz/3500MHz.
We customize stainless steel bracket for all our RF power splitter and RF directional coupler. One bracket for all of passive RF.
| Model No. | BR-3PS-338-160-41F |
| Product Name. | Power Splitter 3 Way |
| Split Loss(dB) | 4.8 |
| Insertion Loss(dB) | ≤0.6 (350-698MHz)
≤0.5 (698-3800MHz) |
| Freq(MHz) | 350-3800MHz |
| VSWR | ≤1.35 |
| PIM Rating(dBc) | -160dBc@2x43dBm |
| Power Rating(W) | 300W (average Per Port) |
| Impedance | 50 ohm |
| Connector | 4.3/10-female |
| Color | Black |
| Operating Temperature(℃) | -30~+65 |
| Weight(kg) | 0.51 |
2 power splitter is one channel input, which is divided into two channels. Ideally, the power from any channel is half of the inlet power. If you change it into logarithm, it is 10 * Lg2 = 3dB less than the original.
Insertion loss: 0.5dB distribution loss: 3dB
However, after the device is inserted into the system, there must be insertion loss. According to the data, the insertion loss of the device is 0.5dB
Similarly, the calculation principle of 3 way power splitter and 4 way power dividers is the same. 3 way power splitter, distribution loss 10 × lg3=4.8； 4 way power divider distribution loss 10 × lg4=5
